學系成員

1. Leo Chau-Kuang Liau, Guo-Bin Lai, Rei-Cheng Juang, Bing-Hung Chang, and Thomas Chun-Kuang Yang, Preparation of Ag/SiO2 near-infrared absorbers using the combination of sputtering and spin-coating depositions, Thin Solid Films,578 (2015) 
2. Chau-Kuang Liau; 林運國, Fabrication of assembled ZnO/TiO2 heterojunction thin film transistors using solution processing technique, Solid-State Electronics, 103(2015) 
3. Chau-Kuang Liau; 許紫弦; 羅培軒, Characterizing p-channel thin film transistors using ZnO/hydrated polyvinyl alcohol as the conducting channel, Applied Physics Letters, 105(2014) 
4. C.K. Liau, Y.C. Lin, Y.J. Peng, Fabrication Pathways of p−n Cu2O Homojunction Films by Electrochemical Deposition Processing, Journal of Physical Chemistry C, 117 (2014) 
5. C.K. Liau, Y.P. Chen , Effects of voltage operating strategy on electrophoretic self-assemblydeposition of spherical SiO2 particles in water, Colloids and Surfaces A: Physicochem. Eng. Aspects, 429, 121-128 (2013) 
6. C.K. Liau, J.W. Kuo, H.N. Chiang, Design and fabrication of ZnO/TiO2-based thin-film inverter circuits using solution processing techniques, Semiconductor Science and Technology, 27 125012 (2012) 
7. C.K. Liau, C.Y. Li, Vacancy defect distribution of colloidal particle deposition in a sedimentation process investigated using Kinetic Monte Carlo simulation, Colloids and Surfaces A: Physicochem. Eng. Aspects, 388 70-76 (2011) 
8. C.K. Liau, C.K. Ma, INVESTIGATION OF ELECTRONIC PROPERTIES FOR NANOTATANIA/METAL-ION-DOPED TITANIA SEMICONDUCTOR PREPARED BY SOL-GEL METHODS, Supplemental Proceedings: General Paper Selections, 3 3-9 (2011) 
9. C.K. Liau, K.L. Wang, Y.J. Peng, Characterization of Rutile Titania Nanorods Synthesized in Low Temperatures, The 13th Asia Pacific Confederation of Chemical Engineering Congress proceedings, 1-5 (2010) 
10. C.K. Liau, 吳榮康, Optimal control of sintering strain rate of YSZ electrolytes for SOFCs using TMA during the sintering process, Industrial & Engineering Chemistry Research, 48 7567–7573 (2009) 
11. C.K. Liau, 周文偉, Fabrication of field-effect transistors based on Fe3+-doped titania by sol–gel methods, Semiconductor Science and Technology, 24 055007 (1-5) (2009) 
12. C.K. Liau, 周文偉, Investigation of field-effect transistors fabricated by metal-ion-doped nano-titania using sol–gel technique, Microelectronic engineering, 86 361-366 (2009) 
13. C.K. Liau, 黃彥凱, Effects of influential factors on sedimentation self-assembly processing of photonic band gap crystals by relative humidity-controlled environments, Chemical Engineering and Processing, 47 1578-1584 (2008) 
14. C.K. Liau, 黃彥凱, Process optimization of sedimentation self-assembly of opal photonic crystals under relative humidity-controlled environments, Expert Systems with Applications, 35 887-893 (2008) 
15. C.K. Liau, 陳忠群, Optimal heating trajectories of controlling green tapes of YSZ electrolyte deformation using TMA during thermal processing , Journal of Power Sources,177 1–8 (2008) 
16. C.K. Liau, 林炬澈, Semiconductor characterization of Cr3+-doped titania electrodes with p–n homojunction devices, Thin Solid Films, 516 1998–2002 (2008) 
17. C.K. Liau, 周文偉, 吳榮康, Photocatalytic Lithography Processing via Poly(vinyl butyral)/TiO2 Photoresists by Ultraviolet (UV) Exposure, Industrial and Engineering Chemistry Research, 47 2273-2278 (2008) 
18. C.K. Liau, 掌軒, 楊重光, 黃建龍, Effect of poly(ethylene glycol) additives on the photocatalytic activity of TiO2 films prepared by sol–gel processing and low temperature treatments, J. Chinese Institute of Chemical Engineers, 39 237-242 (2008) 
19. C.K. Liau, 戴維文, Process optimization of preparing spherical titania colloids with uniform distribution using artificial neural networks, Colloids and Surfaces A: Physicochem. Eng. Aspects, 320 68–73 (2008) 

1. C.K. Liau, Y.P. Chen, Fabrication of SiO2 photonic band gap films using electrophoretic self-assembly deposition technique, The 2nd International Conference on Engineering and Applied Science (2013 ICEAS), (2013) 
2. 郭如維, 林運國, C.K. Liau, 利用奈米氧化鋅/二氧化鈦製作與設計陶瓷電晶體邏輯元件之探討, 2012化工年會, 1-4 (2012) 
3. C.K. Liau, 林于捷, 利用電化學沉積法製備p-Cu2O/n-Cu2O同質接面及其特性探討, 2012年材料年會, 1-3 (2012) 
4. C.K. Liau, 李楷國, 林運國, 設計與製作組裝式陶瓷電晶體元件之探討, 2012年材料年會, 1-4 (2012) 
5. C.K. Liau, 陳元培, 影響電泳沉積法製備光子晶體的因子及其性質探討, 2012材料年會, 1-3, (2012) 
6. C.K. Liau, K.L. Wang, Y.J. Peng, Characterization of Rutile Titania Nanorods Synthesized in Low Temperatures, 13th Asia Pacific Confederation of Chemical Engineering Congress, (2010) 
7. C.K. Liau, 張宏睿, 彭勇傑, 二氧化鈦/銅化物光電極於太陽能產氫的特性探討, 99年中國材料年會, (2010) 
8. 林俊穎, C.K. Liau, 陳元培, 利用動力蒙地卡羅方法於膠體粒子堆疊程序的探討, 99年中國材料年會, (2010) 
9. C.K. Liau, 吳欣杰, 張凱健, 採用奈米二氧化鈦設計與製作場效電晶體探討, 99年中國材料年會, (2010) 
10. C.K. Liau, 鐘元駿, Design of TiO2 spherical particles as a light-scattering layer in dye sensitized solar cells, Internaitonal conference on ENERGY AND SUSTAINABLE DEVELOPMENT, 23 (2010) 
11. C.K. Liau, 張宏睿, Effect of Tio2 Doped with Cu2O on Photo-Electrode for Solar-Hydrogen System, International conference on ENERGY AND SUSTAINABLE DEVELOPMENT (ESD2010), 18 (2010) 
12. C.K. Liau, 鐘元駿, 溶膠凝膠法合成二氧化鈦球性質分析與在DSSC電極上的應用, 2009材料年會, 255 (2009) 
13. C.K. Liau, 陳佳宏, 張宏睿, 二氧化鈦摻雜Zn2+之特性探討,2009材料年會, 257 (2009) 
14. C.K. Liau, 林道凱, 吳欣杰, 利用氧化鋅設計與製作場效電晶體元件的探討, 2009 材料年會, 162 (2009) 
15. C.K. Liau, 周文偉, 吳欣杰, 最佳化金屬離子摻雜奈米二氧化鈦(TiO2)製作場效電晶體程序的探討, 2009化工年會, 89 (2009) 
16. C.K. Liau, 陳佳宏, Investigation of characteristics of TiO2 doped with Zn2+, International Symposium on Advanced Ceramics and Technology for substainable Energy Applications, 177-178 (2009) 
17. C.K. Liau, 周文偉, Fabrication of field-effect transistors based on Fe3+-doped titania, 8TH PACIFIC RIM CONFERENCE ON CERAMIC AND GLASS TECHNOLOGY, 56 (2009) 
18. C.K. Liau, 吳榮康, Determination of the optimal heating rates for the YSZ electrolyte fabrication during the sintering process, 8TH PACIFIC RIM CONFERENCE ON CERAMIC AND GLASS TECHNOLOGY, 57 (2009) 
19. C.K. Liau, 戴維文, Preparation of spherical titania colloids with uniform distribution using sol-gel technique , Taiwan/Korea/Japan ChE Conference and 55th TwIChE Annual, 76 (2008) 
20. C.K. Liau, 賴秋梅, 陳佳宏, PVB/Ni與PVB/YSZ雙層圓柱組成系統之最佳化燒結程序, 中國材料科學學會2008年年會, 197 (2008) 
21. C.K. Liau, 吳榮康, 蔡志昌, 固態氧化物燃料電池之YSZ電解質高溫燒結製作程序的最佳化控制, 中國材料科學學會(2008)年年會, 191 (2008) 
22. C.K. Liau, 周文偉, 林道凱, 利用奈米二氧化鈦設計與製作場效電晶體元件, 中國材料科學學會2008年年會, 92 (2008) 
23. C.K. Liau, 簡國隆, 戴維文, Effects of spherical titania particle electrodes on dye-sensitized solar cells, 33rd IEEE Photovoltaic Specialists Conference, (2008) 

C1 Article in Maganize
1. 廖朝光, 固態氧化物燃料電池電解質層燒結的最佳化控制策略, 工程通訊, (2008). 

C2 Patent: 
1. 利用光觸媒法於微影製作技術,中華民國專利第350944（2011） 
2. CERAMIC MESFET DEVICE AND MANUFACTURING METHOD THEREOF, 美國, US8,017,941B2, (2012) 
3. 陶瓷材料之金屬半導體場效電晶體(MESFET)元件及其製造方法,中華民國專利第097104511 (2012) 
4. 具金屬氧化物陶瓷材料之半導體場效電晶體(MOSFET)及其製法(2015)